Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal and installation of facing of a radiator
11.4. Removal, dismantling and installation of bumpers
11.5. Removal and installation of mudguards of wheels and podkrylok
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice and facing of a box of airinflow
11.8. Cowl
11.9. Lateral doors
11.9.1. Removal and installation of an upholstery of a forward door
11.9.2. Replacement of glass of a forward door
11.9.3. Replacement of a window regulator of a forward door
11.9.4. Replacement of the external handle of a forward door
11.9.5. Replacement of the internal handle of a drive of the lock of a forward door
11.9.6. Replacement of the switch of the lock of a forward door
11.9.7. Replacement of the lock of a forward door
11.9.8. Replacement of the limiter of opening of a forward door
11.9.9. Removal and installation of a forward door
11.9.10. Removal and installation of an upholstery of a back door
11.9.11. Replacement of glass of a back door
11.9.12. Replacement of a window regulator of a back door
11.9.13. Replacement of the external handle of a back door
11.9.14. Replacement of the internal handle of a drive of the lock of a back door
11.9.15. Replacement of the lock of a back door
11.9.16. Replacement of the limiter of opening of a back door
11.9.17. Removal and installation of a back door
11.10. Back door
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Removal and installation of external rear-view mirrors
11.16. Removal and installation of casings of a steering column
11.17. Dashboard
11.18. Heater and conditioner
11.19. Salon fittings
11.20. Screen wiper of a wind window
11.21. Replacement of a motionless glazing of a body
11.22. Care of a body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




11-9-15-zamena-zamka-zadnejj-dveri.html

11.9.15. Replacement of the lock of a back door

You will need a key-shestigrannik «on 6».
1. Remove the internal handle of a back door and a vlagozashchitny film (see. «Replacement of the internal handle of a drive of the lock of a back door»).
2. Turn out two bolts of fastening of the lock of a back door.
3. Take away the lock and remove from the lever of blocking of the lock the plastic connecting plug.
4. Remove the lock assembled with draft.
5. Pull for draft, insert into a cut in the lower part of the lock a screw-driver and remove draft.
6. Wring out a clamp...
7.... also separate a block of a plait of wires of the electric drive of blocking of the lock of a back door.
8. Turn out two screws of fastening...
9.... also take from an assembly aperture of the internal panel of a back door the electric drive of blocking of the lock.
10. For removal of a latch of the lock of a back door turn out it from a carving opening at doors and remove from the car.
11. Establish all removed details as it should be, the return to removal.
12. If the zakhlopyvaniye of a back door is accompanied by blow of the lever of the lock about a latch, adjust the provision of a latch. For this purpose weaken an inhaling of fastening of a latch and, moving a latch in the cross-section or longitudinal direction, achieve an unaccented zakhlopyvaniye of a door. After that tighten latch fastening.

«previous page
11.9.14. Replacement of the internal handle of a drive of the lock of a back door
following page»
11.9.16. Replacement of the limiter of opening of a back door