Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal and installation of facing of a radiator
11.4. Removal, dismantling and installation of bumpers
11.5. Removal and installation of mudguards of wheels and podkrylok
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice and facing of a box of airinflow
11.8. Cowl
11.9. Lateral doors
11.10. Back door
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Removal and installation of external rear-view mirrors
11.16. Removal and installation of casings of a steering column
11.17. Dashboard
11.18. Heater and conditioner
11.19. Salon fittings
11.20. Screen wiper of a wind window
11.21. Replacement of a motionless glazing of a body
11.22. Care of a body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




11-5-snyatie-i-ustanovka-bryzgovikov-koles-i-podkrylkov.html

11.5. Removal and installation of mudguards of wheels and podkrylok

In arches of forward wheels and in a back part of arches of back wheels the plastic podkrylka protecting a body from abrasive influence of sand and stones, rejected by wheels are established. The mudguards established behind forward wheels, protect body thresholds. Back mudguards protect the cars going afterwards, from damage by stones taking off from under back wheels.
It be required to you: a screw-driver with a crosswise edge, a key rattle with a crosswise bat for an otvorachivaniye of remote screws.

Note
Work is shown for mudguards and podkrylok on the left side of the car. The right mudguards and podkrylka remove and establish similarly.

For removal of a mudguard of a forward wheel execute the following operations.
1. Turn out two screws of fastening of a mudguard and remove it.
2. Establish a mudguard of a forward wheel as it should be, the return to removal.

For removal forward a podkrylka execute the following operations.
1. Remove a mudguard of a forward wheel (see above in this subsection).
2. Turn out eleven bolts of fastening...
3.... also remove a podkrylok.
4. Turn out three screws of fastening...
5.... also remove the lower part of fastening a podkrylka.
6. Establish details as it should be, the return to removal.

For removal of a mudguard of a back wheel execute the following operations.
1. Turn out three screws of fastening of a mudguard and remove a mudguard.
2. Establish a mudguard of a back wheel as it should be, the return to removal.

For removal back a podkrylka execute the following operations.
1. Remove a mudguard of a back wheel (see above in this subsection).
2. Turn out six bolts of fastening...
3.... also remove a podkrylok.
4. Establish a podkrylok of a back wheel as it should be, the return to removal.

«previous page
11.4.2. Removal, dismantling and installation of a rear bumper
following page»
11.6. Removal and installation of a forward wing