Chery Amulet since 2006
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in a way
	4. Maintenance
	5. Engine
	6. Transmission
	7. Running gear
	8. Steering
	9. Brake system
	10. Electric equipment
	11. Body
		11.1. Features of a design
		11.2. Possible malfunctions of a body, their reason and ways of elimination
		11.3. Removal and installation of facing of a radiator
		11.4. Removal, dismantling and installation of bumpers
			11.4.1. Removal, dismantling and installation of a front bumper
			11.4.2. Removal, dismantling and installation of a rear bumper
		11.5. Removal and installation of mudguards of wheels and podkrylok
		11.6. Removal and installation of a forward wing
		11.7. Removal and installation of a lattice and facing of a box of airinflow
		11.8. Cowl
		11.9. Lateral doors
		11.10. Back door
		11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
		11.12. Seats
		11.13. Removal and installation of facing of a tunnel of a floor
		11.14. System of passive safety (SRS)
		11.15. Removal and installation of external rear-view mirrors
		11.16. Removal and installation of casings of a steering column
		11.17. Dashboard
		11.18. Heater and conditioner
		11.19. Salon fittings
		11.20. Screen wiper of a wind window
		11.21. Replacement of a motionless glazing of a body
		11.22. Care of a body
	12. Appendices
	13. Electric equipment schemes

11-4-1-snyatie-razborka-i-ustanovka-perednego-bampera.html

11.4.1. Removal, dismantling and installation of a front bumper

It be required to you: keys «on 8», «on 12», a drill in diameter of 5 mm, a drill.


1. Remove radiator facing (see. «Removal and installation of facing of a radiator»).	2. Remove mudguards and podkrylka of forward wheels (see. «Removal and installation of mudguards of wheels and podkrylok»).


3. Disconnect blocks of a plait of wires from conclusions of fog lights.	4. Turn out two bolts of fastening of a front bumper to an arm on the left side...


5.... and two bolts on the right side.	6. Turn out on one bolt (from each party) back fastening of a bumper.


7.... also remove a bumper.	8. Drill three rivets of fastening and remove the left lateral holder of a bumper.

9. Similarly remove the right holder.

10. Establish details as it should be, the return to removal.