Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
4.1. General provisions
4.2. Daily service (EO)
4.2.1. Check of wheels
4.2.2. Check of level and an oil dolivka in system of greasing of the engine
4.2.3. Check of level and a dolivka of cooling liquid
4.2.4. Check of level and a dolivka of brake liquid in a tank of a hydraulic actuator of brake system
4.2.5. Check of level and a dolivka of working liquid in a tank of the hydraulic booster of a steering
4.2.6. Check of level and a liquid dolivka in a washer tank
4.2.7. Check of external lighting devices
4.3. Procedural maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




4-2-2-proverka-urovnya-i-dolivka-masla-v-sistemu-smazki-dvigatelya.html

4.2.2. Check of level and an oil dolivka in system of greasing of the engine

It be required to you: engine oil, pure rag.

Note
The manufacturer recommends to apply oils of the Shell brand of a class of viscosity 10W-30 or 5W-30 (depending on climatic conditions) groups of quality are not lower than SG.

Preventions
Before check of level of oil after a trip muffle the engine and wait for 5-10 mines while oil will not merge in a case.
Add oil of the same brand, viscosity and a quality class, as well as at used earlier.
Oil level in a case of the engine should not exceed «MAX» label, leaks through laying and the epiploons, the raised consumption of oil differently are possible.
Check level, having established the car on an equal horizontal platform.

The stopper of a maslonalivny mouth is located on a cover of a head of the block of cylinders. The index (щуп) level of oil is located in the right back part of the block of cylinders near an inlet pipe.
1. Take the top part of the index of level of oil from the holder...
2.... take out the index, wipe it a pure rag and insert into place.
3. Repeatedly take out the index (щуп). Level of an oil film should be between «MIN» and «MAX» labels. If level of oil comes nearer to a label of "MIN" or below it, add oil.
4. For a dolivka of oil turn a stopper of a maslonalivny mouth counter-clockwise...
5.... also remove it.
6. Fill in oil in the engine, supervising its level by means of the index. Before taking out the index, wait for 2-3 mines let's to oil flow down in a case.
7. After level of oil will reach demanded, wrap a mouth stopper.

«previous page
4.2.1. Check of wheels
following page»
4.2.3. Check of level and a dolivka of cooling liquid